What’s The Plumber Cost To Install A Toilet?

There are few things more frustrating than having to do any major remodeling of your home.  Especially if the remodeling is because of outdated or old fixtures.  One such fixture is the toilet in your home.  We don’t often think that we would ever have to replace or repair the toilets in our homes, but the reality is that they too need attention.

Over time, the porcelain base of the toilet could weaken and eventually crack.  The tank system on your toilet could get worn and start leaking or worst, end up splitting apart.  These are all very real problems that any homeowner could face at some point in their lives.  If this happens to you, keep calm and know that it isn’t the end of the world.

The biggest concerns when having to replace or install a new toilet isn’t that it is a messy job, but probably that it is going to cost a fortune.  Knowing the installation cost of new toilet will relieve you of all the stress.

The average cost to install a traditional toilet ranges from $125 to $250, but that doesn’t include the price of the toilet.  The actual toilet that will be installed is usually supplied by the homeowner.  This price isn’t set in stone either and there are several factors that should be taken into consideration when an estimate is calculated.  Some extras could be having the plumber dispose of your old toilet or whether the plumbing components are still in good condition.

The installation process is usually less stressful than you might think, provided that you have a professional plumber doing the job for you.  The process usually includes the following:

  • The plumber will turn off and disconnect the water in your home, so you won’t be able to access water until they are finished.  This is usually between an hour  or two.
  • The plumber will repair the shut off valve for your toilet if it is worn or faulty.
  • The old toilet will be drained, removed and the flange inspected for any faults or damages.  The flange connects the toilet to the drainpipe to the floor, so it’s vital that it is in good condition.
  • Then the actual process of installing and setting the toilet takes place.  Once that’s done, the water is connected and the plumber will test to ensure that it is working correctly.

Hopefully after reading this, you will have an idea about the plumber cost to install a toilet. If you need to know how to repair a leaking toilet, this article will help you fix the most common causes of leaks under the toilet.

Should you need help on any toilet repair and maintenance, Plumbers 911 is the one to call! Visit www.Plumbers911.com or call 305-662-0668 (Miami-Dade County FL), 954-468-0512 (Broward County FL), 561-327-6287 (Palm Beach County FL) or 877-745-3257 (Washington DC) to schedule a service!

Before hiring an expert, be sure to watch this video in which an Expert Local Coral Gables FL Plumber Talks About Common Plumbing Problems in Dade County.

The Proper Way To Unclog A Septic Tank In Fort Lauderdale FL

Proper maintenance of your septic system is incredibly important yet a lot of people fail to do so. Over time, a septic tank that hasn’t been regularly maintained would cause major problems like backed up toilets and malfunctioning drains. Needless to say, repair of these problems are very costly. Prevention is better than cure. Avoid expensive solutions and spare yourself the trouble by learning how to unclog and prevent septic tank clogs in the future.

An easy way to solve your septic tank problem would be through septic treatments. Septic treatments are essentially bacteria that help break down the household waste in your septic tanks in order to free up space. These septic treatments come in water-soluble packets that you flush down your toilet into the septic tanks.  Common forms include liquid, gel, or powder. Hopefully, the bacteria and the enzymes present in these packets would help free up waste that has been backing up your septic systems. You should be able to see the results over time.

While waiting for the bacteria to finish its job, avoid flushing down strong detergents, cleaning agents, and anti-bacterial waste products into your septic system. Doing so wouldn’t be doing your septic treatment any favors since this would make the enzymes work harder. The time it takes varies for every household, depending on how clogged your septic systems are. It would be best to consult the package instructions.

If after the prescribed time has lapsed and the problem is still persistent or recurring, maybe it’s time to call your plumber or septic tank specialists to have them take a look. Your septic tank might be long overdue for a pumping or at worst, reinstallation of a new system.

There are numerous options and tips available online to help you maintain your septic tank system. Before springing for expensive repairs, it would be best to get second and third opinions from other specialists. Again, prevention will always be better than cure so read up on how your septic system works, familiarize yourself with your drain fields, and have it maintained regularly. Good luck!

Hopefully, these tips will help you unclog septic tank in Fort Lauderdale FL! Here are more tips on how to maintain your septic tank. If you think you need the help of the pros, check out Douglas Orr plumbing! You can also reach them at: 305-887-1687 or 954-522-828 or 1-800-DOUG-ORR.

Watch this video for more information on septic system maintenance:

How To Repair A Washing Machine Waste Pipe Blocked In Hollywood FL

Doing your usual load of laundry and suddenly find yourself with a washing machine that refuses to drain? Don’t fret. It’s not time to spring for a new one just yet! Here are some things to consider when your washing drain is clogged:

1. Check all the drain points for blockages and obstructions. It’s likely that there’s just a buildup of debris stuck in the drains of your washing machine. Thankfully, these blockages are fairly easy to clean out. There are many drain cleaners available to help you clear these out. Do your research and find out what options are safe for your machine and for your drains. After all, you don’t want to cause a bigger damage that will be costly in the future.

2. Check your drain tube for clogs. The drain tube is easy to remove. You should be able to detach it from your washing machine, no problem. It’s usually large enough to look into so you can inspect it closely. You can also try to blow into the drain tube to check if air is coming up from the other side. If you find that this isn’t a case, then you’ve located your problem!

3. If your drain tube isn’t the problem, you might need to check the drain pipe where the machine drain tube goes. Remove the tube attached to the machine from your drain and try to flush water down the pipe. If the water backs up, it must mean there’s debris stuck in your drain pipe.

4. To solve the clogs in both your drain tube and drain pipe, a plumber’s snake ought to come in handy. Simply inset the snake into the problem area, carefully turning it clockwise as you do so. When the end of the snake seems to have hit debris, push through it and see if you can keep feeding the snake into the drain. If you can’t it must mean the clog is solid and you can now slowly pull up the drain snake to remove the clog from your waterways. It would help to have a bucket to catch the debris when you pull it out.

We hope these tips answer your problems to washing machine waste pipe blocked in Hollywood FL. Check out these tips on how to maintain your washing machine. If you need more help, don’t hesitate to contact Plumbers 911 Florida. You can reach them at 305-662-0668 (Miami-Dade County FL), 954-468-0512 (Broward County FL), 561-327-6287 (Palm Beach County FL).

For more handy washing machine tips, here’s how to install an automatic washing machine shutoff valve! The video below should show you how:

Why is A Video Camera Sewer Line Inspection In Fort Lauderdale Important?

Your sewer lines play an important role in your plumbing system. While your clean water lines supply you with potable water that you can use for your daily activities, your sewer lines are the ones responsible for transporting the waste from your home to your septic tank or the city sewer. What you have to remember is that proper use of your plumbing is important to avoid getting your sewer lines clogged. For instance, non-biodegradable waste should not be flushed down the toilet or thrown down the drain pipes. These include cigarette butts, diapers, body wipes, condoms and cotton swabs among many others. You should also have your lines cleaned and inspected regularly to ensure that they are still in good condition or that they don’t have holes or cracks.

The Importance Of Having The Sewer Line Inspected

When buying a home, you should definitely consider having a sewer line inspection done before committing to a certain property. Older sewer pipes in our area used to be made from clay and cement, and many of them have breaks, cracks, offsets, and even whole parts have broken away due to settling, earth movement, tree roots, etc. You can imagine what sorts of problems these issues create in homes. Most cities require that homeowners pay for any repairs needed, up to the part that joins their part in the street – quite a long distance in some cases. In Seattle we started recommending them as a matter of course years ago as it became clear that our elderly infrastructure wasn’t aging all that well, not to mention that sewer repairs can be so costly. I hear that agents on the Eastside are beginning to recommend them too, though it’s not quite as common.

Apparently, sewer inspection is not only particularly important for already homeowners but also for those who are just planning to buy a house. Inspections will save people from a lot of plumbing problems as well as avoid unwanted and highly expensive repairs. If the house is old, an inspection should not be disregarded. Read more about this from this valuable online resource I found.

Sewer Inspections for Older Homes

Tree roots growing into sewer lines is a common problem. Roots crawl into tiny openings and expand in the sewer line, latching on to other debris that typically cause backups such as grease or eggshell waste. Sometimes chemicals can kill the trees roots but if the roots reappear, the pipe may be damaged and require excavation to fix the problem.

Homes that were constructed prior to city sewers often relied on cesspools. After cities installed public septic systems, sometimes the cesspools were left intact and connected to the sewer line. You won’t know unless you inspect the sewer.

Many homes built in the 1950s have sewer lines made from tar paper called Orangeburg pipes. These disintegrate and collapse over time. If a home has Orangeburg, the sewer line definitely needs to be replaced.

I hope I have shared with you the importance of an inspection done through a  video camera sewer line in fort lauderdale FL . video camera sewer line in fort lauderdale FL. Also read this article on how to keep your main sewer line from clogging to keep your sewer pipes at tip-top shape. Should you need this plumbing service now, just visit www.OrrPlumbing.com or call them at 305-887-1687 or 954-522-8282 to schedule a service!

Learn easy tips for a new outdoor shower installation! Watch Douglas Orr Plumbing’s video now.

What’s The Best Toilet Unblocker In Washington DC?

A blocked toilet is one of the many plumbing issues that you’ll experience at home. It may be caused by several factors such as the flushing of toilet paper, paper towels, napkins and other sanitary products. These things do not decompose easily and that’s the reason why they get trapped in the pipes. Other causes include tree root intrusion in your sewer pipes or the flushing down of foreign objects such as toys, cigarette butts, clips and other things that are not even supposed to get disposed of in the john. If you are facing this problem right now, follow this guide to remove the blockage.

1. Start by using your reliable plunger. Remember that there are different kinds of plunger so use the one that’s meant for toilets. Position the plunger right on top of the hole and make sure that the rubber part is covered in water. Plunge up and down consistently and repeat this process for 15 times. Test if the clog is removed.

2. If the problem persists, use a plumbing snake. Insert the wire into the toilet and turn the crank clockwise to move it further into the drain. When it reaches a solid material, keep on pushing on the wire and turning the crank to break through the clog. If you’re no longer feeling any solid there, slowly and carefully pull out the snake and dispose of the waste properly.

3. If the clog is too stubborn, you might need to pull the toilet out and remove the clog from there. For this kind of job, you will need other plumbing tools and materials such as the ever reliable wrench, bolt removers and plumber’s putty among many others. Check my next article for the detailed guide on how to remove a toilet.

4. Meanwhile, never use chemical drain uncloggers to remove the blockage. It might worsen the problem and harm your plumbing system in the long run.

I hope that you learned the most effective toilet unblocker in Washington DC. If your john is no longer efficient and you want to have a new one installed, read this article on how to replace a toilet for step-by-step tips. And should you need professional plumbers, just visit www.Plumbers911.com/washington-dc/ to schedule an appointment.

What are the most common plumbing problems you have to be ready for? Watch this video to find out.

Tips On How To Find A 24 Hour Plumber In Opa Locka FL

You just can’t tell when a plumbing emergency will arise. A clogged toilet may just introduce itself in the morning just as you are about to go to work. Your faucet may suddenly burst just as you are enjoying a festive lunch with your friends. You may also be woken up by the sound of a broken pipe in the middle of the night. Being prepared as a DIY plumber is advantageous but if you don’t have the skills, you might want to consider getting in contact with a reliable 24 hour plumber. The only question is, how do you find the right guy? And I want to quote an article I read online,

“The winter months are always the least convenient time for your boiler to break down or pipes to burst – which is probably why the worst household catastrophes tend to happen just then. To the same extent, building work horror stories also tend to crop up during the chilliest months.Tales such as a rogue builder disappearing off half way through a job, leaving homeowners with half a wall or no window panes in cold weather.

The need to get things done quickly means there are countless tales of cowboy traders taking advantage of desperate households more likely to rush decisions to get a job done mid-winter. Here’s how to avoid getting caught out.” (See full article here.)

Apparently, it is indeed a challenge to find the best crew to take care of your plumbing needs. With a great number of plumbers offering their services, how would you know which of them is the best catch? If you are a new homeowner and still don’t know what to do, check out this fantastic guide on hiring a plumbing expert.

How to Find a Good Plumber

It can be very difficult to find a good plumber. The very good ones are in high demand because they are all about their work and their customers. Sadly, some people want to cheat you out of your money, but this guide will help prevent that.

Check to make sure that they have a plumbing license. The most basic rule is to be sure that they’re licensed and carry full insurance that protects you and your neighbour’s property in the event of a catastrophe.

I hope that you enjoyed reading the valuable online resource that features tips on how to search for a 24 hour plumber in Opa Locka FL. Learn more about plumbing license information and verification by checking out this article. And should you need the best man for your plumbing needs, simply call Douglas Orr Plumbing.

Are you planning to do your plumbing on your own? Watch this video and learn the three no-nos of DIY plumbing.

Quick And Easy DIY Toilet Tank Crack Repair In Greenacres FL

Replacement isn’t always the best solution when it comes to toilet issues. Sometimes, there are issues that can be fixed simply by repair. For instance, in the case of cracks, you can easily patch these things away with the help of an appropriate repair kit. To teach you how to do this task properly, check out this DIY guide I specially researched for you!

How to Spot and Fix a Cracked Toilet

A cracked toilet is often a confusing plumbing problem because the cracks are not always easy to spot. In some cases the toilet crack can be present since the toilet was first manufactured, but for some reasons may not surface for years and years. Other times a toilet without any cracks can suddenly develop one and start leaking.

Leaks from a cracked toilet can come in many shapes and sizes. When a toilet crack is caused by extreme temperature changes that cause the toilet to crack all the way through and cause flooding the cause is obvious. But mostly a leak from a cracked toilet occurs slowly so the source can be relatively difficult to identify.

So aside from the most common areas where cracks usually appear on the toilet, the article also pointed out some of the reasons why cracking happens. For instance, it can be a result of over tightening the bolts when the john was installed. As I have always mentioned on other toilet installation articles, you should never ever over-tighten bolts. Instead of securing it to the floor, it just might get damaged in the long run. Anyway, let me share with you another article that talks about all the ways that you can care for your ceramic throne. Check this out!

Basic Toilet Maintenance & Care

If a toilet has been working fine but suddenly flushes or drains very slowly, the problem is usually a clogged drain. If you’ve plunged and snaked out the drain but your toilet still flushes poorly, it may be the toilet’s siphoning action. When a toilet is flushed, water rushes from the tank through the valve seat, around the rim, and through a siphon jet chamber built into the porcelain at the front of the bowl. As the water encircles the rim, some washes down through the rinse holes in the underside of the rim. The rush of water causes a cleansing action and creates enough force to push waste out through the back of the bowl and down into the waste pipe.

First, open the tank and check the water level. A low water level means there may not be enough force to kick off the siphoning action. Toilets are designed so that the tank, when filled to the top of the overflow tube, holds enough water for a good flush. Water-saving devices such as dams, bottles, or bending the float rod will foil the design. You’re better off getting a toilet that’s designed to be a water-saving fixture. Flush the toilet and make sure the flapper allows all of the tank’s water to complete the flush.

I hope that you learned valuable information about toilet tank crack repair in Greenacres FL. Also read about how to install a new toilet so that you’ll be prepared in case a replacement unit is your last resort. And if ever you need experts to take care of your plumbing for you, just call Plumbers 911 Florida or visit their website at www.plumbers911.com/florida to book a service appointment!

Learn all about Plumbers 911 Florida’s awesome and reliable emergency services! Watch their video now.

A Handbook On Chicken Barbecue Time

Roast chicken will definitely liven up a Sunday dinner with your loved ones. But the question is, do you know how to perfectly roast chicken? Do you find it hard to make its skin crispy and salty? Do you always dry it out? If your answer is yes to the last two questions and a big “NO” to the first one, you do have a big problem. Grilled chicken may not be everyone’s favorite but once cooked the right way, even the pickiest of kids will eat it. So to help you make your weekend dinner a memorable one — in a good way — here’s an informative article on how not to burn your chicken.

How to Barbecue Chicken Without Burning It

In my experience—not as a barbecue champ or a cooking instructor but as a dinner guest—the food I see most abused when I go to a cookout is chicken. The combination of fatty skin, sweet barbecue sauce, and high heat results in what often looks like chunks of cinder. You can try scraping off that bitter, black coating, but its flavor and aroma—what I call “eau d’ashtray”—flavors the meat.

The secret to great barbecued chicken, one with moist, tender meat and sticky, pleasantly smoky skin, is to lower the heat of the fire and leave the sauce off until the last minutes of cooking. Most of the flavor comes from a spice rub that’s been on the bird from the get-go and from the smoke of the fire, both of which fully permeate the meat during the long, slow cooking.

According to the article, it is best to cook chicken over low fire. This way, you won’t have to flip it every now and then in the hopes of preventing overcooking. You can simply watch over it just to make sure that there won’t be flare-ups. Also, when applying sauce on the fowl, you have to do it in the latter part, specifically when it’s already cooked. This way, the chicken won’t burn even if the sauce has sugar content. Anyway, another important factor to consider when grilling this type of meat is the amount of time that it should stay on the grill. Check out this guide for more information.

Chicken Grilling Times

Grilling the entire bird is the ultimate flavor bomb — cooking meat on the bone keeps things juicy while the skin crisps up, and turns out an outer layer brimming with flavor. Plus, a whole grilled chicken makes for a stunning presentation. Butterfly it so that it lies flat and grills evenly over direct heat. Bonus: This cuts down the cooking time by half. And small, hibachi-size grills need not apply, as you’ll need extra grate space to move the chicken around when inevitable flare-ups occur.

Grilling brings out the best in these snack-size pieces — the fat drips away, leaving behind a crisp wing perfect for gnawing to the bone. They are easily separated into the drumette and the wing end by hacking at the joint using a cleaver or heavy knife. Some people prefer the meatier drumette, but the crackle and crunch of wing ends have their own appeal. Be prepared to move the wings around as flare-ups occur, and arrange them so that the smaller ends point away from the high heat to prevent burning.

hope you learned a lot about chicken barbecue time from today’s post. If you’re looking for delicious dishes to serve to your loved ones, check out these chicken barbecue recipes. And to get the best tasting barbecued dishes, use the best grill in town, Get one by visiting www.LaCajaChina.com or calling 1-800-338-1323.

Get a 10% discount when you purchase your next La Caja China! Watch this video to find out how.

Causes And Fixes For Toilet Clogs In Miami Beach FL

According to research, toilet clogs are among the most common plumbing problems that people experience at home. And though some of us laugh at the idea of a messy bathroom flooring and an  overflowing toilet, it’s really something to seriously act on immediately. The truth is, even the bravest of husbands hate dealing with this issue and it’s not surprising at all. Who would ever want to get dirty trying to flush human waste down the drain, right?! Luckily, the task isn’t so hard to complete. But before you get your hands on your plunger, read this article first for you know the usual culprits of toilet clogging.

Common Causes Of Toilet Clogs

If you experience problems with your toilet clogging, the culprit is probably the toilet paper. “Toilet paper that is one-ply dissolves the best,” says Joe Piccioli, owner of highly rated Power Plumbing & Sewer Contractor in Chicago. “Any multiple ply or paper advertised as ‘strong enough to hold a cup of water’ will not break down as easily and can block the toilet trap.”

Piccioli and other highly rated plumbers say single-ply paper, such as Scott tissue, disintegrates better while thicker brands, such as Charmin, tend to create problems.

So according to Angie’s List, only one-ply tissue paper can get flushed down the toilet. Anything that’s multiple plied or anything thicker shouldn’t. If you’ll ask me, I’d completely forbid paper products in the toilet. Why do we have to use it as a trash can in the first place? Other things that must not be flushed down include diaper, condom, tampon, Q-tips, dental floss and of course, any kind of toy. You certainly must watch for your kids. Anyway, let’s get to the tutorial part of this blog. Check out this DIY guide to know how to get rid of toilet blockages.

How to Unclog a Toilet

There’s never a good time to plunge a toilet, but clogs seem to happen at the most inopportune moments. Fortunately, you can clear most clogs yourself without having to pay a plumber. Follow these steps, and you should have the problem cleared up before the in-laws come over for dinner.

Flush only once. If it’s not flushing the first time, don’t flush again. This will cause more water to be pumped into the toilet bowl. If the toilet becomes clogged, the first flush will not cause the bowl to overflow, but the second flush might.

I hope that you enjoyed my blog about the causes and remedies for toilet clogs in Miami Beach FL. Also learn how to prevent clogged toilets to save you from a great deal of inconvenience. And should such as problem arise, just get in touch with professionals by visiting www.OrrPlumbing.com or calling them at  305-887-1687 or 954-522-8282!

Do you have leaking pipes at home? Learn how to fix them by watching this video.

The Best Drain Cleaning Tools In Biscayne Park FL

Drain cleaning is important for your home for a lot of reasons. First of all, it prevents clogging. Second of all, it keeps the flow of liquid in your system smooth. Last but not least, cleaning thwarts the onset of plumbing emergencies such as backups, contamination of the potable water supply and even pressure-related problems. With that said, it is only wise that you take time to clean your sink drains even if it’s only weekly. Here’s the best and the cheapest tools and supplies that you can use for this activity!

The Cheapest Way to Clean a Drain without Using Noxious Chemicals

Drain cleaners are some of the most concentrated and dangerous cleaning products available to the home consumer. The active ingredients are some combination of bleach, lye and caustic potash. Extra-strength drain cleaners are simply labeled “poison.”

Unfortunately, drain cleaners are also really good at dissolving hair, and hair is typically what clogs bathroom sink and tub drains. I wanted to find out if there was a safer and more environmentally friendly way to clean my bathroom drains.

So according to the article, the best ways to clean your drainpipes include the use of non-chemical supplies. Instead of toxic cleaners, you can simply go for bacterial cleaners (also known as enzyme cleaners) which simply destroy organic substances in the pipes; air cleaners and also home remedies such as baking soda with vinegar followed by boiling water. Now to make sure that you’ll do it properly, here’s a detailed DIY guide!

How to Clean Drains

Pour 1 cup of white vinegar down the drain. Let it sit for 30 minutes, then rinse your sink with hot water to remove the stain. Boil 3 cups of water to remove drain odors and partial blockage. Pour 1 cup of baking soda down the drain first and follow it with the boiling water. If it still drains slowly, repeat until any odor and clog is gone.

I hope that these resources I shared above will help you maintain and care for your drain system. Aside from knowledge of the best drain cleaning tools in Biscayne Park FL, you might want to read about the importance of drain cleaning to completely integrate this activity in your weekly routine. And should you need professional drain cleaning services for your home, don’t forget to call Plumbers 911 Florida at 305-662-0668 (Miami-Dade), 954-468-0512 (Broward) or 561-327-6287 (Palm Beach) or visit their website at www.Florida.Plumbers911.com

Find out how and why Plumbers 911 Florida provides the best solutions to your plumbing issues! Watch their video!